NEMA 14 Unipolar 0.9deg 0.11Nm (15.2oz.in) 0.4A 10V 35x35x33mm 6 Wires Stepper Motor

Technical Parameter

Item	Specifications
Step Angle Accuracy	±5%
Resistance Accuracy	±10%
Inductance Accuracy	±20%
 Temperature Rise	80K Max.
Ambient Temperature	-20℃~+50℃
Insulation Resistance	100MΩMin.@ 500VDC
Dielectric strength	One minute@500VAC∙5mA Max.
Shaft Radial Play	0.06Max.@450g
Shaft Axial Play	0.08Max.@450g

 

Technical Specification

Model No.	Polar	Rated Voltage	Current/ Phase	Resistance/ Phase	Inductance/ Phase	Holding Torque		# of Leads	Rotor inertia	Weight	Length
35H033HM-0406	Unipolar	V	A	Ω	mH	oz-in	kgf · cm	6	g∙ cm2	kg	mm
		10	0.4	25	20	15.2	1.1		14	0.17	33

 

Mechanical Dimension                                                                  

 

Pull Out Torque Curve

FAQ

Q: Is there the products tested before shipping?

A: All of our motors will be 100%QC before shipping.

 

Q: What are the common problems faced when using stepper motors?

A: Common problems include missed steps, resonance, overheating, inadequate torque, and electrical noise interference.

 

Q: Can I run a stepper motor at high speeds?

A: Running a stepper motor at high speeds can be challenging due to torque drop-off, rotor inertia, and other limitations. High-speed operation may require careful motor selection and optimized control parameters.

 

Q: Are there any safety considerations when using stepper motors?

A: Safety considerations include proper electrical wiring and grounding, heat dissipation, mechanical hazards, and adhering to the guidelines for safe operation.

http://www.sitmotors.com/